CONTROL series video
Consulting Service E-mail：firstname.lastname@example.orgSubmit Requirements
Control series angle heads are mainly used for machining centers. It can be installed in the tool magazine and can be automatically converted between the tool magazine and the machine tool spindle. 360 ° manual adjustment can be made between the angle head and its direction scale ring and the stop arm equipped with a stop pin. The output end of TCUcn universal angle head can rotate within 0~90 °. When the angle head is removed from the main shaft of the machine tool, there is a safety pin to prevent the main drive taper handle from rotating, so as to ensure that the relative position between the taper keyway and the stop pin remains unchanged after the angle head is removed. One of the main features of the control angle head is that its input shaft is integrated with the main drive taper handle to ensure rigidity.
After receiving your message, we will arrange personnel to contact you as soon as possible
Developing with National Industry
Copyright © 2023 Beijing Zhengke Technology Co., Ltd.