Product Introduction
Technical parameter
- Measuring range: maximum diameter 360mm (radius 180mm); Maximum height 460mm
- Natural marble base and column: maximum linear error 2 μ M/m, stainless steel support frame provides high rigidity and longer service life, and the gripper has self-adjusting horizontal support feet.
- ISO/BT/HSK/CAPTO... Replaceable rotating spindle of other models, maximum runout < 4 μm
- Double prismatic special guide rail: 2 X-axis guide rails, 1 Z-axis guide rail; Double-row circulating ball bearing, lifetime lubrication (P/H grade), interchangeable manual mechanical brake of rotating spindle. Vacuum tensioning system (only available for model E346+)
- Tool measurement vision system:
- C-MOS sensor frame image area 6.4x4.8mm
- Magnification 25X
- Cutting edge detection
- Hardware configuration:
- 15 '' color 16:9 vertical touch screen
- Intel Nseries 4-core processor
- UBUNTU LINUX operating system
- Solid state hard disk memory storage
- Standard software:
- CNC machine tool origin and conversion sleeve management
- Creation of single-edge or multi-edge tool list
- Post-processing of tool group and tool information
- Magnetic chip code reading function (e.g. Balluff, excluding hardware)
- Printable tool table report
- Theoretical measurement and tolerance management
- Analog comparator measured in fixed crosshair mode, and the tool setter has telecentric lens and LED illuminator.
- Axis resolution: X=1 μ m, Z= 1 μ m. It also has TID (Automatic Tool Identification System).
- Size: L = 950 mm, H=972, P=430 mm, Maori: 90 kg
Previous
Next
Previous
Next
Inquiry